Wire and wire rod

Pulled wire
Dimension area: 0,20 – 23,00 mm round
Tolerances: DIN 671 h9, DIN 670 h8, f8
Design: pulled dead and twist-free, no welded joints
Bare pulled, consistency 700 – 850 N/mm²
Bare pulled with electro-polishable surface, consistency 700 – 850 N/mm²
Pulled, final smouldering, consistency max. 700 N/mm²
Bare pulled, smouldered, lightly re-pulled, consistency max. 750 N/mm²
Cold upsetting categories, bonded, condate-coated
Spring steel wire slide-favourable coated
Supplied forms: Coils, rings, wound coils, top sticks
Wire on directed bars
Special profiles:
3kt, 4kt, 6kt, 8kt
Semi-round: Width 1,5 – 5,0 mm Height 0,35 – 2,0 mm
Flat wire: Width 1,5 – 10,0 mm Thickness 0,18 – 2,5 mm
Band steel: Width 5,0 – 150,0 mm Thickness 0,05 – 1,8 mm


Wire rod
Dimension area: 5,0 – 34 mm round
Tolerances: DIN 1013
Design: rolled, heat-treated, stained or hulled
Ring weights: roughly 800 – 1000 kg
Lightning protection wire
Dimension area: 8,0 and 10,0 mm round
Materials: 1.4301 / 1.4404 / 1.4571
Design: DIN 57185, inner diameter 900 mm, outer diameter 1200 mm
Ring weights: roughly 800 – 1000 kg, or divided to 50 kg
Ribbed concrete steel “REVAL”
Dimension area: 3,0 – 12 mm Coils 700 – 1500 g5,5
50,0 mm bars up to 12000 mm max.
Materials: 1.4301, 1.4401, 1.4404, 1.4462, 1.4362 and 1.4571
Main certification: DIN 488 BST 500 S
Supplied forms: in bars up to 12000 mm
in Coils 700 – 1500 g

Valbruna owns sites in Vicenza, Bolzano (Italy) and Fort Wayne (USA). The production programme includes roughly 700 different grades and variants, supplemented by ESR- and VAR-melted qualities. In addition to electric arc furnaces, AOD converters, continuous casting and heat treatment plants, there are also several rolling mills and forging and surface processing capacities available.

The dimensions that are produced are presented for the categories hot rolled bar, forged bars, bright bar, wire and wire rod. Furthermore, we have listed overviews for the most commonly used materials.

If you require materials in designs or tolerances that are not listed or if you have special requirements regarding the chemical analysis or mechanical qualities we will happily verify the realisability of the same and we will provide you with a relevant quote. Valbruna produces material according national and international standards or special requirements, e.g. high pressure applications, oil and gas applications, medical applications etc. Valbruna is approved raw material supplier for the ITER-Project and for Nuclear Projects (KTA 1401).